Loading...
⚡ 1kg Low MOQ · Factory Direct Glitter & Mica⚡ Source Factory Direct Wholesale · Custom Loose Glitter & Mica Pigments · 1kg Low Trial MOQ · 48h Free 50g Lab Samples
mlmcustom@mlmcosmetic.comLoading...
Technical guide to sample matching biodegradable glitter for cosmetic formulation in IT. EU 2023/2055 microplastic compliant, ICP-MS tested.

Cosmetic formulation labs and production facilities in global technical hubs face an unprecedented regulatory shift. With the European Commission's enforcement of Regulation (EU) 2023/2055 under Annex XVII of REACH, non-biodegradable microplastics—specifically traditional polyethylene terephthalate (PET) glitters—are rapidly being phased out across leave-on and rinse-off applications. Formulators executing a sample match for biodegradable glitter for Cosmetic formulation in IT (Information Technology-driven R&D frameworks and Italian cosmetic manufacturing ecosystems) require strict physicochemical parity with legacy synthetic glitter without sacrificing brilliance, suspension stability, or solvent resistance. At MLM Pigments, our Shenzhen OEM/ODM raw material manufacturing facility provides precision color matching, particle sizing, and substrate conversion to transition formulas consistently into full regulatory compliance.
Formulators looking to transition from plastic-based effect pigments can evaluate our high-clarity Cosmetic Grade Biodegradable Glitter range, specifically engineered to pass stringent European environmental standards while retaining intense specular reflectance.
In high-throughput cosmetic R&D and digital formulation management (IT systems integration), substituting PET glitter with biodegradable alternatives frequently uncovers three primary engineering failures:
Traditional PET has a specific gravity of approximately 1.38 g/cm³. Regenerated cellulose exhibits a higher density of approximately 1.45 g/cm–1.50 g/cm³. When replacing PET in low-viscosity aqueous gels or body oils, formulators often observe immediate particle sedimentation. Resolving this requires recalibrating yield stress using precise rheology modifiers (e.g., acrylates/C10-30 alkyl acrylate crosspolymers or gellan gum networks) calibrated against the particle size spectrum (0.05mm to 3.0mm).
Legacy bio-glitters often relied on water-soluble shellac or low-crosslink polylactic acid (PLA) coatings. When exposed to harsh polar solvents like ethyl acetate or butyl acetate in nail lacquer formulations, these coatings break down within hours, leaching dye into the suspension matrix. MLM Pigments solves this by utilizing proprietary cross-linked plant cellulose matrices encapsulated with cosmetic-grade metal oxides, preventing dye migration even after 90 days of accelerated thermal stability testing at 45°C.
Many suppliers market "degradable" PET or oxo-degradable polymers as bio-glitter. Under EU 2023/2055, non-soluble synthetic polymers under 5mm are explicitly restricted regardless of oxo-degradability claims. Only naturally derived, unmodified, or fully biodegradable polymers tested under ISO 14851 / OECD 301B standard protocols (>90% biodegradation in aquatic environments within 28 days) are exempt from the microplastic ban. Formulators using unverified stock risk product recalls across the EU.
To achieve precise sample matching, the physical matrix of the alternative raw material must mirror the spectral reflection and mechanical properties of the control sample. MLM Pigments manufactures biodegradable glitter across three engineered carrier substrates:
Commercialization of color cosmetics across the European Union and North America requires rigorous raw material qualification.
MLM Pigments's bio-glitter series contains no microplastics as defined under REACH Annex XVII entry 78. Complete technical dossiers include:
Under MoCRA guidelines, color additives must meet strict purity standards. MLM Pigments provides batch-specific Certificate of Analysis (CoA) documentation detailing colorant identification according to 21 CFR Part 73/74.
Inductively Coupled Plasma Mass Spectrometry (ICP-MS) screening is performed on every production batch to guarantee heavy metal levels remain far below worldwide safety thresholds:
$$\text{Pb} < 2.0\text{ ppm}, \quad \text{As} < 1.0\text{ ppm}, \quad \text{Hg} < 1.0\text{ ppm}, \quad \text{Cd} < 1.0\text{ ppm}$$
| Parameter | Standard PET Glitter (Legacy) | Synthetic Mica Effect | MLM Bio-Glitter (Cellulose Matrix) |
|---|---|---|---|
| Primary Carrier Substrate | Polyethylene Terephthalate | Synthetic Fluorophlogopite | Regenerated Eucalyptus Cellulose |
| Particle Size Range | 0.05mm - 3.0mm (1/128" - 1/8") | 0.01mm - 0.20mm | 0.05mm - 3.0mm (1/128" - 1/8") |
| Aquatic Biodegradability | Non-Biodegradable (0%) | Mineral (Inorganic / Exempt) | OECD 301B >90% within 28 Days |
| EU Microplastic Status | Banned (EU 2023/2055) | Compliant (Exempt Mineral) | Compliant (Naturally Modified Polymer) |
| Solvent Resistance (Nail Lacquer) | Moderate to High | Complete Immunity | High (Ethyl/Butyl Acetate Stable) |
| Heat Threshold (Continuous / Peak) | 120°C / 140°C | >800°C Continuous | 160°C Continuous / 200°C Peak |
| Density (g/cm³) | ~1.38 g/cm³ | ~2.80 g/cm³ | ~1.45 - 1.50 g/cm³ |
| Heavy Metals (Pb / As / Hg) | Varies (< 10 ppm) | Pb < 5 ppm, As < 2 ppm | Pb < 2 ppm, As < 1 ppm, Hg < 1 ppm |
| MOQ (Sample Matching) | 25 kg | 25 kg | 1 kg (Lab Match) / 25 kg (Bulk) |
| Sample Match Lead Time | 3-5 Business Days | 3-5 Business Days | 24 - 48 Hours |
| Bulk Production Lead Time | 10 Business Days | 10 Business Days | 7 - 10 Business Days |
Achieving an exact optical and technical match for an existing formulation requires a structured 4-step sample matching protocol:
Provide your targeted color standard, desired particle size (e.g., 0.008" / 0.2mm or 0.040" / 1.0mm), and base chassis details to MLM Pigments. Our lab uses digital color spectrophotometry to match hue, sparkle index, and particle distribution, dispatching custom lab-matched samples within 24–48 hours.
Because cellulose glitter has a slightly higher density (~1.45 g/cm³) than PET (~1.38 g/cm³), suspensions in water-based gels may require a 5% to 10% increase in yield stress. Using polymeric thickeners like acrylates/C10-30 alkyl acrylate crosspolymer ensures complete suspension without particle settling.
Our cross-linked cellulose bio-glitter is specifically treated with a protective barrier layer that resists aggressive organic solvents, including ethyl acetate, butyl acetate, and high-concentration alcohols, preventing color leaching and film degradation.
Every batch of MLM Bio-Glitter is produced from plant-derived regenerated cellulose and independently certified via OECD 301B aquatic biodegradability testing (>90% degradation within 28 days). This guarantees complete exemption from the EU 2023/2055 microplastic restriction.
We test all raw materials via ICP-MS technology to ensure ultra-pure safety profiles: Lead (Pb) < 2 ppm, Arsenic (As) < 1 ppm, Mercury (Hg) < 1 ppm, Cadmium (Cd) < 1 ppm, fully exceeding standard EU 1223/2009 and FDA MoCRA cosmetic safety requirements.
Transitioning your color cosmetic portfolio to meet modern eco-compliance standards does not mean compromising on aesthetic performance or formulation integrity. MLM Pigments delivers factory-direct raw materials engineered to pass the world's most stringent microplastic and heavy metal regulations.
In addition to plant-cellulose options, formulators seeking traditional nail lacquer stability or synthetic mineral effects can explore our full spectrum of Solvent Resistant Standard Glitter and pearlescent pigments.
Disclaimer: Technical data and regulatory references provided herein (including EU Regulation 2023/2055, EU Regulation 1223/2009, and US FDA MoCRA) are based on current legislative texts and laboratory test parameters for raw materials manufactured by MLM Pigments. This documentation is intended solely to support independent brand formulators and Responsible Persons in compiling their Cosmetic Product Safety Reports (CPSR) and product filings. Final formulation compliance, toxicological risk assessment, and finished product registration remain the responsibility of the brand owner.
Looking for custom formulation or laboratory testing samples? Contact our MLM Pigments technical engineering team or request a free sample kit directly.
Target Formulation Material:
Sample Match: Biodegradable Glitter Cosmetic Formulation Guide
Includes 50g sealed lab pouch, lot-specific COA, Technical Data Sheet (TDS), and ISO 22716 regulatory package.

Whether formulating eyeshadow palettes, lip glosses, nail polishes, or compounding industrial epoxy resin, start with our 1kg low trial MOQ or complimentary 50g qualification sample with complete TDS and batch COA.